| Image |
Description |
Price |
|
 |
Rail Alignment Sensor
Rail Alignment System 4000 Sensor
Firmware Controlled:
A llows for different reaction times to maximize efficiency in varying environmental conditions.
Photocell Technology:
New and smaller surface mounted Photocells inc… |
$0.00
|
|
 |
Rail Alignment System 4000 Servo Assembly
Servo Platform for Plasser tamping machine, also available for Harsco-Jackson & Canron.
The Servo Platform is mounted at the front of the tamper and supports the Sensor which automatically moves left or right in line with t… |
$0.00
|
|
 |
Rail Alignment System 4000 Laser Mount Assembly
TRIPOD / MOUNT for attaching to Laser Cart.
Fine adjustment screw at the rear and quick acting clamps for the laser. The Laser Mount / Tripod houses the laser gun, and provides fine line adjustment. The latter may als… |
$0.00
|
|
 |
Rail Alignment System Light Bar
LED LIGHTBAR:
In 2009 we introduced some new updates to the RS4000 system. One of the items to receive updates was the Lightbar (The updated LED Lightbar is pictured to the left). The new LED version of the Lightbar is compatibl… |
$0.00
|
|
 |
Rail Alignment Laser
Laser Beam Integrity:
New Focusing procedures increases beam purity and sharpness over previous models.
Circuit Board Technology:
New style PCB for motor oscillation increases reliability and enhances “cold starts… |
$0.00
|
|
 |
Rail Alignment System 4000 Panel
Both the RS4000 Panel and RS4000 Sensor received extensive internal updates. The old system was a complicated analog system, where the new system is a very simple, modern digital design.
The new digital components and the … |
$0.00
|
|
 |
Rail System 4000 Laser Cart
LASER CART 56.5 inches (42.0 inches also available). Track clamps, battery case and safety flag. The Laser Cart is clamped to the reference line and is used to support the Laser Mount/Tripod.
High quality, gauge-specific carts … |
$0.00
|
|
 |
Rail Alignment system clamp bracket assembly
Rail Alignment System 4000 laser clamp bracket assembly and support.
The rear clamp is the same as the front clamp with the exception of the threaded shaft to allow for height adjustment.
Items needed: Rear Support 40106 ,… |
$0.00
|
|
 |
RS4000 Panel Servo Speed Components
RS4000 Panel Servo Speed Selection
Speed Selection Components:
The yellow arrow illustrates the select button.
The red arrow illustrates the setting display.
Tools needed for install:
#3 Phillips screwdriver to open panel.
… |
$0.00
|
|
 |
RS4000 Servo Motor Assembly
RS4000 Servo Motor Assembly
Assembly includes new motor (pre-wired), drive arm, mounting plate, terminal strip, motor to mounting plate isolators and drive arm to crank isolator all preassembled and ready for installation.
… |
$0.00
|
|
 |
RS4000 Panel Ground Strap Kit
RS4000 Panel Ground Strap Kit
Ground strap kit includes:
Qty 1, 5" Braided Ground Strap (Part 40287)
Qty 2, 1/4" Internal Tooth Lock Washer
Tools needed for install:
7/16" Wrench
The ground … |
$0.00
|
|
 |
RS4000 Sensor Ground Strap Kit
RS4000 Sensor Ground Strap Kit
Ground strap kit includes:
Qty 1, 9" Braided Ground Strap (Part 40288)
Qty 1, 5/16-18 x 1 ¼" Hex Cap Screw
Qty 1, 5/16" Internal Tooth Lock Washer
Tools needed … |
$0.00
|
|
 |
Rail Alignment Trolley Buggy Scale Ruler
The Buggy Ruler is made of Aluminum. Black Annodized with white measurements laser etched on both sides, metric on one side, standard on the other.
… |
$0.00
|
|
 |
Rail Alignment Servo Scale Ruler
Rail Alignment Servo Scale Ruler is to measure track offset.… |
$0.00
|
|
 |
RS 4000 Front Clamp Assembly
Rail System 4000 laser clamp bracket assembly and front support.
The clamp assemblies and supports are put together as one larger assembly.
Ready to drop into laser bracket.
Items needed: Front Support 40105 ,Clamp Assembly 40181, 4… |
$0.00
|
|
